下面是山東通華機械廠-你壓路機根據公路類型(等級)來選型

1,、對于一,、二級干線公路和汽車路,，應使用6~10t的具有較高壓實能力的大型振動壓路機;對于三級以下的公路，或不經常進行壓實作業時,，h好配備2t左右的機動靈活的振動壓路機。

 for the first&second grade national trunk roads&spe-l roads for automobiles,，座駕壓路機,， 6-10t large-scale vibratory roller with high compaction capacity should be used; for the highways below the third xgrade，/when compaction operationxs are not often carried out,， it is better to equip with about 2t mobile&flexible vibratory roller.

2,、對于水泥混凝土路面，可采用輪胎驅動式串聯振動壓路機;

for cement concrete pavement,， tyre-driven series vibratory roller can be used.

3,、對于瀝青混凝土路面，應選用全驅動式振動壓路機;

for asphalt concrete pavement,， full-drive vibratory roller should be selected.

4,、對于高j級路面路基的底層，h好選用輪胎壓路機或輪胎驅動振動壓路機進行壓實,，以獲得均勻的密實度;

 for the bottom of high-grade pavement subgrade,， it is better to use tyre roller/tyre-driven vibratory roller for compaction， in order to obtain uniform density;

5,、修補路面時可選用靜力作用式光輪壓路機,。

 when repairing the road surface， the static acting light wheel roller can be selected.