下面是山東通華機械廠-你壓路機根據公路類型(等級)來選型

1,、對于一,、二級干線公路和汽車路,，應使用6~10t的具有較高壓實能力的大型振動壓路機;對于三級以下的公路,，或不經常進行壓實作業時,，h好配備2t左右的機動靈活的振動壓路機,。

 for the first&second grade national trunk roads&spe---l roads for automobiles,， 6-10t large-scale vibratory roller with high compaction capacity should be used; for the highways below the third xgrade,，/when compaction operationxs are not often carried out,， it is better to equip with about 2t mobile&flexible vibratory roller.

2、對于水泥混凝土路面,，可采用輪胎驅動式串聯振動壓路機;

for cement concrete pavement,， tyre-driven series vibratory roller can be used.

3、對于瀝青混凝土路面,，應選用全驅動式振動壓路機;

for asphalt concrete pavement,， full-drive vibratory roller should be selected.

4、對于高j級路面路基的底層,，h好選用輪胎壓路機或輪胎驅動振動壓路機進行壓實,，以獲得均勻的密實度;

 for the bottom of high-grade pavement subgrade，微型壓路機,， it is better to use tyre roller/tyre-driven vibratory roller for compaction,， in order to obtain uniform density;

5、修補路面時可選用靜力作用式光輪壓路機。

 when repairing the road surface,， the static acting light wheel roller can be selected.