濟南俊生建筑工程有限公司為您提供乙級鋼質隔熱防火門訂做,。濟南防火卷簾門的卷軸故障:
scroll failure of jinan fire shutter door:
1.在使用濟南防火卷簾門的時候,卷軸能夠轉動,但是簾片卻怎么也起不來.這種情況的掛鉤片斷了或者是掉了,需要重新固定,原因則是因為電機跑限位了,維修好就行了.
1 when using the jinan fire shutter doors, the reel to rotate, but the curtain piece but also how to get up. in this case the hook fragment/out, need to be fixed, the reason is because the motor running limit, maintenance is good.
2.如果濟南防火卷簾門的簾板新軸上掉下來了:首先我們先將卷簾門的卷軸給放在墻兩側的固定板上,然后再將卷軸上的螺絲給拆卸下來,然后把幾塊小的簾片給固定在卷簾上,再將卷簾給吊到卷軸上,之后再將幾塊小的卷簾上的孔和卷軸上的孔給對應著使用螺絲固定好,再將電機把卷簾給卷到一定的位置上,使用電機來調試一下,調試好了就行了.
2 if the jinan fire shutter doors curtain plate new shaft down: first we will reel fixed plate rolling door&put on the wall on both sides,&then scroll on the screws to remove&put a few pieces of small curtain piece fixed to the shutter, the shutter to hang to scroll, then a few small rolling on the hole&the hole on the reel to correspond to use screws fixed, the motor of the curtain to roll to a certain position, use the motor to debug, debugging on the line.
3.濟南防火卷簾門在下降停止幾個鐘之后會自動上升的狀況:首先要確定這個卷簾門是不是已經設定了相關的程序是在卷簾門下降幾個鐘之后自動上升的,或者是說這個工業卷簾門有沒有和報警控制盤連接在一起,若是連接的了的話,是不是因為控制盤發出了上升了指令.如果這些都不是的話,那么就可能是濟南防火卷簾門的控制鍵松動了.
3 jinan fire shutter doors will automatically increase the situation after several down to stop clock: first to determine the rolling door is not already set the relevant program is automatically rising after falling several clock in the door,/is that the industrial doors have alarm control panel&connected together, if connected. it is not because of a rise in the control panel instructions. if these are not, then it is the control key jinan fire shutter doors loose
     聯系時請說明是在云商網上看到的此信息，謝謝,！
     聯系電話：0531-87029790,，13153144852，歡迎您的來電咨詢,！
     本頁網址：http://gaojuwu.com/cp/17293894.html
     推薦關鍵詞： 安全防盜門, 鋼質防火門, 木質防火門, 室內門, 防火窗系列